DTA3050 - ASI multiplexer with 5 (or 10) ASI inputs, ASI and IP outputs

• Conditional Access:The DTA-3050 provides DVB-CSA and BISS encryption and AES conditional access encrypt capabilities. DVB-CSA encryption is available as fixed key BISS or Simulcrypt based interfaces compatible with most major DVB-CSA CAS vendors. AES encryption includes support for Verimatrix VCAS for residential set top and computer-based decryption.
• Aggregation of ASI or IP based SPTS or MPTS services: The DTA-3050 provides ten ASI input ports enabling it to aggregate locally encoded SPTS or re-muxed MPTS from encoders, receivers, video servers or other devices providing MPEG 2 Transport via ASI and IP, or SMPTE30 and IP.
• IPTV: Gigabit Ethernet distribution of digital television services includes MPTS, SPTS over UDP for Set Top, or computer decoding and MPTS over UDP for bundled distribution (Digital Simulcast) including DVB ATSC.
• ASI:Three port mirrored ASI output interface provides integration with traditional distribution methods including Cable, Satellite, and Terrestrial.
• SMPTE-310: An optional 2 port mirrored SMPTE-310 output interface provides integration with ATSC distribution.
• Flexible Configuration & Control:Controlling and configuring the DTA-3050 is easy. Whether using the integrated front panel keypad and LCD, Terminal or remote Web page interface.
• DTVGuide:Create and upload your own program listings for distribution over ATSC, DVB, and IPTV applications using our web-hosted DTVGuide electronic program guide generator service. A very economical way to instantly begin sending EIT data, DTVGuide requires no additional equipment when paired with the DTA and its built-in EIT injection carousel. The DTA fetches EIT data which has been uploaded to DTVGuide over the internet, and immediately begins to inject the data into the transport stream.

• 8 Button Tactile Raised keypad: Mode, Select, Enter, Escape, Up, Down,Left, Right
• Blue Translucent LCD 20 character by 2 row
• Front Panel Host LEDs Power, Alarm, Link, Busy, MPE
• Front Panel LEDs In : 1 – 10 ASI Out : Alarm, ASI, SMPTE 310, CA, GigE

ASI Inputs

• ASI x 10 (BNC)
• 188 or 204 Byte mode
• SPTS or MPTS
• 210 Mbps per input
• 256 PIDs per input
• Fill scrubbing on input
• Input Modes Auto (Remap all services) Manual (Add/Drop/Remap PID/Services) Pass (Pass all services as-is)

Redundancy

• 1+1 Input N+1, N+2 Input
• ASI x 2 (BNC inputs for auto switch)
• No external controller required

Outputs

• Gigabit Ethernet (210Mbs) SPTS over UDP MPTS over UDP Very low jitter

• ASI
  (model is DTA 3050-ASI) Mirrored (BNC x 3) Byte or Burst Mode
  54 Mbs Byte
  210 Mbs Burst Jitter less than 150 (nS)

• SMPTE-310 (model is DTA 3050-SMPTE-310) Mirrored (BNC x 2) Byte Mode only 19.39 Mbs fixed SMPTE-310 option includes ASI

• No Tables
• MPEG Tables PAT CAT (if CA is enabled) PMT
• DVB Tables (Add/Drop/Remap DVB Services) NIT SDT TDT/TOT EIT
• ATSC Tables (Add/Drop/Remap ATSC Services) VCT (Cable or Terrestrial) MGT STT RRT EIT (1-4)
• DCII Tables (Add/Drop/Remap Digicypher services to DVB or ATSC)

Conditional Access Encryption

• DVB-Common Scrambling Algorithm (CSA)
• DVB Simulcrypt TS 103 197 v 1.2.1
• FIPS 140-2 hardware based random number generator (RNG)
• Approved 3rd Party CA Vendors include: CSA:    Irdeto    Conax    EuroCAS    KeyFly    Xcrypt
• AES: Verimatrix

Host Platform

• PowerPC
• Adtec optimized Linux Kernel
• 10/100 Ethernet RJ-45 (Eth 0)
• 10/100/1000 Ethernet RJ-45 (Eth 1)
• Serial Port (RJ-48)
• USB 2.0 (2)
• IEEE 1394 (Firewire)
• N.C. / N.O. Tally Interface
• XML Configuration
• HTTP, FTP, Telnet, IP Logging, XCP (Adtec encrypted layer 3 protocol)

Power

• 70-240 VAC switching power supply
• 50/60 Hertz
• Rated at 94 Watts return nominal usage 20 watts

Physical

• 19 in. wide, 1.75 in. tall, 16 in. deep, (483 x 44.5 x 406 mm)
• 1 Rack Unit
• Weight 13lbs.

Environmental

• Active cooling (Push pull Fans)
• Operating: 0 to +50 degrees C
• Storage: -30 to +65 degrees C
• Less than 70% RH
• Non-Condensing