Products
Multistandard PCI based modulator: ATSC VSB, DVB-C, DVB-T / DVB-H, QAM (A/B/C), ADTB-T / DTMB, CMMB, DVB-T2, IQ, ISDB-T, DVB-C2.
Multi-standard PCI based 44-MHz IF output modulator : ATSC VSB, DVB-C, DVB-T / DVB-H, QAM (A/B/C), ADTB-T / DTMB, CMMB, DVB-T2, IQ, ISDB-T, DVB-C2.
Multistandard PCI based 36-MHz IF output modulator : ATSC VSB, DVB-C, DVB-T / DVB-H, QAM (A/B/C), ADTB-T / DTMB, CMMB, DVB-T2, IQ, ISDB-T, DVB-C2.
The TVB590 DVB modulator can output industry standard 55~860 MHz and 964~1700MHz selectable RF, IF and DVB-ASI signal. The card accepts input by using Transport Stream (TS) files located on the harddrive, or through the more…
Transport stream from hard drive thru PCI express bus interface and DVB-ASI/SMPTE-310M input.
Available modulation options:CMMB, DVB-T/H, ATSC 8VSB, QAM, DVB-S/DVB-S2, T-DMB, ISDB-T, ISDB-S, DTMB, ATSC-M/H, DVB-T2, DVB-C2
Multi-standard modulator for PCI Express with support for most QAM-, OFDM- and VSB-based modulation standards: ATSC VSB, DVB-C, DVB-T / DVB-H, QAM (A/B/C), ISDB-T, DTMB, CMMB, DVB-T2, DVB-C2.
Cost-effective PCI based modulator with support for ATSC, DVB-C, QAM-A/B/C and DVB-T. All-channel upconverter 47 .. 862MHz covering entire VHF and UHF band. Supports all constellations and modulation modes for each supported standard. Bi-directional DVB-ASI port
Satellite modulator compliant to DVB-S as defined in ETS 300 421 and to DVB-S2 as defined in ETS 302 307.
Integrated L-Band Upconverter with on-board 950 .. 2150-MHz synthesiser
Satellite modulator compliant to DVB-S as defined in ETS 300 421 with Integrated L-Band Upconverter with on-board 950 .. 2150-MHz synthesiser
Wide range of symbol rates allows for both MCPC and SCPC operation
DTU-215 is a USB-2 based multi-standard modulator with support for most QAM-, OFDM- and VSB-based modulation standards. Including DVB-T/H, DVB-C, DVB-C2, ATSC, ISDB-T, DTMB, CMMB, IQ, and more.
The USB digital streaming DTV modulator can play MPEG stream from hard disk and DVB-ASI/SMPTE-310M input into on-air signal. The output can be industry standard 55~2150MHz selectable RF signal. On board synthesizer can generate stable more…
The digital streaming DTV/Mobile TV modulator with USB connection has the ability to stream an MPEG stream from hard disk and output an industry-standard 50-870MHz (VHF + UHF) RF signal.
DVM1000S is professional digital modulator designed for digital satellite uplinks and terrestrial microwave links. It supports QPSK, 8PSK, 16QAM, 16APSK, 32APSK modulation schemes. Applications: Digital satellite Uplinks for Distribution, Contribution, DSNG / ENG Mobile news more…
AZ110 is capable of transmitting one MPEG transport stream in DVB-S, DVB-DSNG or DVB-S2 mode. The AZ110 allows automatic or manual selection between two ASI inputs and has dual ASI monitoring outputs.
The DVM-1903ML VHF/UHF 8-VSB (ATSC) Digital Modulator offers a combination of features and reliability. It complies with ATSC A53 standard for 8-VSB (ATSC) modulation for terrestrial HDTV broadcasting and is applicable for HDTV and SDTV broadcasting.
The modulator includes internal high quality up-converter with variable output between 54 and 870 MHz covering full VHF and UHF band.
ATSC compliant 8VSB modulator HSD100V is a broadcast quality 8VSB modulator.
It complies with ATSC A53 specification for 8-VSB modulation for terrestrial HDTV broadcasting and is applicable to HD and SDTV cable broadcasting.
The AMIGO Solid State VHF/UHF 8-VSB Digital Modulator offers an unparalleled combination of features and reliability. It can be used as a DTV broadcast modulator, tester, or the head end of an RF distribution network. It can accept input through its DVB-ASI and SMPTE-310M input ports. The output is available on 44.0 MHz IF and VHF/UHF RF.
IP input: up to 8 streams (MPTS or SPTS), UDP unicast or multicast.
RF output: up to 8 QAM channels, DVB-C Annex A/C or B.
Output frequency: 47 MHz – 1 GHz.
Modular design allows 6 modulators in 2 RU. Accepts DVB-ASI input.
RF output channels 2~135 (54~860MHz). Minimum 45 dBmV output level. ANNEX B and Annex A support.
Accepts a GbE IP input from clear or pre-encrypted sources
Two RJ45 inputs support redundant IP input, dual sourcing, or loop through
Supports up to 12 QAM-RF channels from 50 to 1002MHz organized as 3 independent groups of 4 channels
Standalone four-channel QAM modulator with TS-over-IP (TSoIP) inputs and directly synthesized VHF/UHF outputs
STC096M is modular headend system. Consists of 4RU subrack with central control unit, power supply and up to 15 Twin 8PSK/QPSK to QAM transcoding modules. Each module transcode two 8PSK/QPSK signals into two QAM/RF channels. Frequency agile outputs 45 – 862 MHz, excellent MER, extreme low phase noise, low cost
AMB406M is modular QAM headend system. Consists of 4RU subrack with central control unit, power supply and up to 15 QAM modulator modules. Each module modulates one ASI stream into one QAM/RF. Frequency agile outputs 45 – 862 MHz, excellent MER, extreme low phase noise, low cost
The DVM1000-T/H Digital Modulator is a high quality,professional and cost-effective solution, suitable to drive digital television transmitters; the Modulator is fully contained in a single 19” 1U rack drawer.
The modulator is fully compliant with the ETSI standard EN 300 744 for DVB-T & DVB-H.
NetMod-DTTV broadcast modulator has been designed to provide a cost effective and high quality solution for broadcast network operators, system integrators and transmitter manufacturers aiming to deploy digital TV services over DVB-T, DVB-H or more…
AMB307M is modular DVB-T headend system. Consists of 4RU subrack with central control unit, power supply and up to 15 COFDM (DVB-T) modulator modules. Each module modulates one ASI stream into COFDM (DVB-T). Frequency agile outputs 45 – 862 MHz, excellent MER, extreme low phase noise, low cost…
Complete DVB-T/T2 Analysis, from RF down to the Video. Allows to monitor DVB-T and DVB-T2 parameters (RF, T2 frame structure, PLP parameters), whatever the DVB-T (MFN/SFN…) or DVB-T2 transmission mode (Single PLP, Multi PLP, SFN/MISO. ..).
The DVM1000-T/H Digital Modulator is a high quality,professional and cost-effective solution, suitable to drive digital television transmitters; the Modulator is fully contained in a single 19” 1U rack drawer.
The modulator is fully compliant with the ETSI standard EN 300 744 for DVB-T & DVB-H.
NetMod-DTTV broadcast modulator has been designed to provide a cost effective and high quality solution for broadcast network operators, system integrators and transmitter manufacturers aiming to deploy digital TV services over DVB-T, DVB-H or more…
AMB307M is modular DVB-T headend system. Consists of 4RU subrack with central control unit, power supply and up to 15 COFDM (DVB-T) modulator modules. Each module modulates one ASI stream into COFDM (DVB-T). Frequency agile outputs 45 – 862 MHz, excellent MER, extreme low phase noise, low cost…
NN6-T2 Gateway is a DVB-T2 Gateway that encapsulates a DVB/MPEG-2 Transport Stream into a DVB-T2 multiplex, inserts synchronization data to allow Single Frequency Network broadcasting and generates T2-MI packets over ASI and IP.
NN6-MIP DVB enables spectrum band optimization by synchronizing the transmission of any transmitter within one SFN cell.
Gigabit Ethernet 10/100/1000 port.Three bi-directional DVB-ASI ports.Transcoding between ASI and TSoIP.
Transmission and reception of Transport Streams over IP networks. IP jitter analysis.
Quad ASI/SDI input/output adapter for PC-based applications that record, play and/or process MPEG-2 transport streams.
Four independent ASI/SDI ports: Input or Output (software selectable).
Each port can carry either DVB-ASI up to 214Mbps or full-frame 10-bit SDI
Universal ASI/SDI input/output adapter for PC-based applications that record, play and/or process MPEG-2 transport streams.
Two independent ASI/SDI ports: Input + Output or Dual Output (software-selectable).
Each port can carry either DVB-ASI up to 214Mbps or full-frame 10-bit SDI
Low-profile PCI card with two independent DVB-ASI outputs. Can be used as a general-purpose output adapter for PC-based applications that generate an MPEG-2 transport stream. MPEG-2 transport-stream test generator
Convenient, compact USB adapter that can be used to capture and generate MPEG-2 transport streams (DVB-ASI) and uncompressed serial digital video (SDI).
HD/SD-SDI, HDMI, ASI, IP interfaces. Selectable bitrate: 128 kbps – 30 Mbps.
VBR/CBR. SD: PAL/NTSC, HD: 720p, 1080i, 1080p.
Professional broadcast video/audio distribution over IP networks, including the public internet.
Composite, S-Video, Analog audio, IP interfaces. VBR/CBR. PAL/NTSC.
Selectable bitrate: 128 kbps – 20 Mbps.
Professional broadcast video/audio distribution over IP networks, including the public internet.
Video inputs/outputs: HD/SD-SDI, HDMI, Composite.
PAL, NTSC, 720p, 1080i, 1080p. Video bitrate: 32 kbps – 8 Mbps.
Audio inputs/outputs: SDI and HDMI embedded, Analog Stereo.
IP output/input (encoder/decoder)
Single channel or multichannel (up to 17 in one chassis).
Video inputs: HDMI or DVI-D. NTSC/PAL, 720p, 1080i, 1080p.
Audio inputs: HDMI embedded, Analog Stereo (balanced and un-balanced).
IP output. FEC. CBR, selectable bitrate 2 – 20 Mbps.
Single channel or multichannel (up to 8 in one chassis).
Video inputs: SD/HD/3G-SDI, HDMI, DVI-D. NTSC/PAL, 720p, 1080i, 1080p.
Audio inputs: SDI and HDMI embedded, Analog Stereo.
IP output. FEC. CBR, selectable bitrate 2 – 20 Mbps.
Single channel or multichannel (up to 8 in one chassis).
Video inputs: HDMI, DVI-D, Component. NTSC/PAL, 720p, 1080i, 1080p.
Audio inputs: HDMI embedded, Analog Stereo (balanced and un-balanced).
IP output. FEC. CBR, selectable bitrate 2 – 20 Mbps.
Single channel or multichannel (up to 17 in one chassis).
Video inputs: Composite, S-Video. NTSC/PAL.
Audio inputs: Analog Stereo (balanced and un-balanced).
IP output. CBR, selectable bitrate 0.1 – 4 Mbps.
Video inputs: HD/SD-SDI, HDMI, Component.
Audio inputs: Analog stereo, HDMI and SDI embedded, AES/EBU.
Audio encoding: AC3, MPEG-1 Layer II, AAC-LC/HEv1/HEv2.
Outputs: ASI and IP. CBR. 0.4 – 30 Mbps.
Video inputs: Component, Composite, HDMI, HD/SD-SDI.
Audio inputs: Digital and Analog.
Outputs: IP and ASI. CBR or VBR.
Dolby Digital (AC-3), MPEG-1 Layer Ⅱ, AAC-LC audio encoding
Video inputs: Component, Composite, HDMI, HD/SD-SDI.
Audio inputs: Digital, Analog and Serial Digital embedded.
Outputs: IP and ASI. CBR or VBR.
Dolby Digital (AC-3), MPEG-1 Layer Ⅱ, AAC, HE-AAC audio encoding
Video inputs user selectable: 4 HD/SD-SDI or 4 Composite. PAL, NTSC, SECAM, 720p, 1080i.
Audio inputs: SDI embedded or Analog Stereo.
Outputs: 1 multiplexed ASI or 1 IP (SPTS/MPTS).
Bit Rate: 1-20 Mbps, configurable for each channel separately.
SD/HD/3G-SDI input, IP output. Selectable bitrate: 250 kbps – 10 Mbps.
VBR/CBR. SD: PAL/NTSC, HD: 720p, 1080i, 1080p.
Audio inputs: SDI embedded.
Live streaming application.
DVI and HDMI inputs, IP output. Selectable bitrate: 250 kbps – 10 Mbps.
VBR/CBR. SD: PAL/NTSC, HD: 720p, 1080i, 1080p.
Audio inputs: Analog stereo, HDMI embedded.
Live streaming application.
Video inputs: HD-SDI. 720p, 1080i, 1080p30.
Audio inputs: SDI embedded (4 stereo pairs), 2 AES and 4 Analog (2 stereo).
Outputs: ASI, IP. Selectable bitrate: 2-15 Mbps. VBR, CBR. 150 msec latency.
Video inputs: SD-SDI or Composite. PAL/NTSC.
Audio inputs: SDI embedded, 4 AES and 4 Analog (2 stereo pairs).
Outputs: ASI, IP. Selectable bitrate: 1-8 Mbps. VBR, CBR. 150 msec latency.
Cube is the world’s first camera-top wireless HD video encoder. Cube streams up to 1080p over WiFi or wired Ethernet. Cube is the ideal solution for guerilla filmmakers who need on-set video monitoring without the cost or complexity of a full VTR rig.
Cube is the world’s first camera-top wireless HD video encoder. Cube streams up to 1080p over WiFi or wired Ethernet. Cube is the ideal solution for guerilla filmmakers who need on-set video monitoring without the cost or complexity of a full VTR rig.
Video inputs: Composite (BNC and RCA), S-Video. NTSC/PAL.
Audio inputs: Analog Stereo (XLR and RCA).
IP output. CBR, selectable bitrate 1.5 – 7.5 Mbps.
HD/SD-SDI, HDMI, ASI, IP interfaces. Selectable bitrate: 128 kbps – 30 Mbps.
VBR/CBR. SD: PAL/NTSC, HD: 720p, 1080i, 1080p.
Professional broadcast video/audio distribution over IP networks, including the public internet.
Composite, S-Video, Analog audio, IP interfaces. VBR/CBR. PAL/NTSC.
Selectable bitrate: 128 kbps – 20 Mbps.
Professional broadcast video/audio distribution over IP networks, including the public internet.
Single channel or multichannel (up to 6 in one chassis)
Video input: Composite, NTSC/PAL. Audio input: Analog Stereo.
Audio compression: MPEG-1 layer2 or Dobly Digital (AC3).
Output: ASI. Selectable video bitrate 2.5 – 15 Mbps.
Video inputs: Composite, S-Video. NTSC/PAL.
Audio inputs: Analog Stereo
IP output. CBR, selectable bitrate 1.5 – 7.5 Mbps.
Video inputs: HD/SD-SDI, HDMI, Component.
Audio inputs: Analog stereo, HDMI and SDI embedded, AES/EBU.
Audio encoding: AC3, MPEG-1 Layer II, AAC-LC/HEv1/HEv2.
Outputs: ASI and IP. CBR. 0.4 – 30 Mbps.
Video inputs: Component, Composite, HDMI, HD/SD-SDI.
Audio inputs: Digital and Analog.
Outputs: IP and ASI. CBR or VBR.
Dolby Digital (AC-3), MPEG-1 Layer Ⅱ, AAC-LC audio encoding
Single channel or multichannel (up to 17 in one chassis).
Video inputs: Composite, S-Video. NTSC/PAL.
Audio inputs: Analog Stereo (balanced and un-balanced).
IP output. CBR, selectable bitrate 1.5 – 15 Mbps.
Video inputs: Component, Composite, HDMI, HD/SD-SDI.
Audio inputs: Digital, Analog and Serial Digital embedded.
Outputs: IP and ASI. CBR or VBR.
Dolby Digital (AC-3), MPEG-1 Layer Ⅱ, AAC, HE-AAC audio encoding
The mediaHUB-Pro 02 is a real-time MPEG-2 Standard and High Definition encoder. HD/SD-SDI and Composite inputs; ASI and IP output. Optional dual stream Dolby Digital AC3 encode.
Video inputs, user selectable: 4 SDI or 4 Composite. PAL, NTSC, SECAM.
Audio inputs: SDI embedded or Analog Stereo.
Output: 1 multiplexed ASI.
Bit Rate: 1-20 Mbps, configurable for each channel separately.
Video inputs: Component (480i, 480p, 720p, 1080i), VGA.
Audio inputs: Analog Stereo, Digital SPDIF.
Video encoding bitrate: 7 – 30 Mbps.
RF output: QAM 256, Annex B, 50-950 MHz.
Video inputs: HD/SD-SDI, HDMI, Component. PAL/NTSC, 720p,1080i,1080p.
Audio inputs: SDI and HDMI Embedded, Analog Stereo, AES/EBU.
Audio encoding: MPEG-1 Layer II, AC3, AAC-LC/HEv1/HEv2
RF output: 8VSB, ISDB-T, QAM 64/256, Annex A/B, 54-870 MHz.
Video inputs: 2 Component. 720p,1080i.
Audio inputs: 2 Analog Stereo.
Audio encoding: MPEG1 Layer II, Dolby Digial (AC3).
Outputs: ASI, IP, IF/RF: QAM64/256, Annex A/B, 44/36 MHz, 50-862 MHz
Video inputs: 2 HDMI. 720p,1080i.
Audio inputs: 2 HDMI embedded.
Audio encoding: MPEG1 Layer II, Dolby Digial (AC3).
Outputs: ASI, IP, IF/RF: QAM64/256, Annex A/B, 44/36 MHz, 50-862 MHz
The Niagara 4100 is designed with a combination of simplicity, portability and power to quickly and easily stream your HD content to broadband and mobile networks including live streaming to Apple® iPhones® and iPads®. With the ability to ingest high-definition video, the Niagara 4100 is ideal for live sports, live newsgathering operation, webcasting or any streaming application where you need rock-solid HD peformance on the go.
Niagara 2120 can input Component, S-Video and Composite video, as well as balanced and unbalanced audio. It can simultaneously output multiple Adobe Flash H.264 streams in multiple bit-rates and resolutions.
Niagara 2100 can input Component, S-Video and Composite video, as well as balanced and unbalanced audio. It can simultaneously output multiple Microsoft Windows Media streams (Silverlight compatible) in multiple bit-rates and resolutions.
Transcoding of up to 10 HD/SD Video Programs.
ASI inputs/outputs, IP inputs/outputs.
MPEG-2 to H.264 (MPEG-4 AVC)
H.264 (MPEG-4 AVC) to MPEG-2
Bitrate adjusting
HD/SD-SDI, HDMI, ASI, IP interfaces. Selectable bitrate: 128 kbps – 30 Mbps.
VBR/CBR. SD: PAL/NTSC, HD: 720p, 1080i, 1080p.
Professional broadcast video/audio distribution over IP networks, including the public internet.
Composite, S-Video, Analog audio, IP interfaces. VBR/CBR. PAL/NTSC.
Selectable bitrate: 128 kbps – 20 Mbps.
Professional broadcast video/audio distribution over IP networks, including the public internet.
Performs simultaneous real-time transcoding of 2, 4, 6 or 8 programs (from 1 to 4 blocks available, outputs 1HD or 2SD per block). Input format may be MPEG2 or H.264, SD or HD with user selectable output formats. ASI inputs, ASI outputs
Network based transcoder that converts Multicast or Unicast streams from MPEG-2 to H.264 or from H.264 to MPEG-2
Sending/Receiving Video/Audio over the Internet using IP Gateway with ARQ (Automatic Retransmission Request) error correction. ADARQ-Tx receives UDP/RTP IP stream, outputs ARQ IP stream. ADARQ-Rx receives ARQ IP stream, outputs UDP/RTP IP stream.
Choice of 4 RF tuners: DVB-S/S2 or DVB-T/DVB-C or DVB-T/T2.
4 ASI outputs. IP-Output-Streaming: 4 MPTS or up to 60 SPTS.
Multistream Demultiplexing, Filtering, Multiplexing.
4 x DVB-CI slots for CAM modules for Multi-Service-Decryption
Wowza Media Server 2 is a high-performance, extensible and a fully interactive Multi-Media web server software with simultaneous streaming to Flash, iOS (iPhone, iPad and other HLS-compatible devices), Android smartphones and tablets, 3GPP mobile devices, Silverlight, IPTV set-tops and more… .
The NetUP DVB to IP Gateway 4x is a high density solution for reception of live satellite TV channels directly from a satellite dish, descrambling them and streaming into an IP network over multicast.
Choice of 4 RF tuners: DVB-S/S2 or DVB-T/DVB-C or DVB-T/T2.
4 ASI outputs. IP-Output-Streaming: 4 MPTS or up to 60 SPTS.
Multistream Demultiplexing, Filtering, Multiplexing.
4 x DVB-CI slots for CAM modules for Multi-Service-Decryption
Decodes SD (PAL, NTSC) and HD (up to 720p and 1080i). Displays up to 1080p
Dual-channel QAM receiver, PCI Express.Compliant with J.83 Annex A (DVB-C), B and C. 2 ASI output ports for monitoring.
Digital IP decoder / media player for AVC/H.264 and MPEG 2 HD/SD file playback and IP stream decoding. Whatever your source, the edje 4111 HD can automatically scale the content to match your output target up to 1080P60 for outstanding HD playback. The edje 4111 can easily be configured using the included web-based control application and front panel menu.
Standalone compact professional satellite DVB-S/S2 receiver supporting QPSK, 8-PSK, 16-APSK and 32-APSK. Full TS output on IP and DVB-ASI. LNB power insertion. Web and SNMP interface for setting parameters and observing status.
DVB-S / DVB-S2 receiver that can be configured as single-channel receiver with support for QPSK, 8-PSK, 16-APSK and 32-APSK, or as dual-channel receiver with support for QPSK and 8-PSK
The TLV300E is a Professional HDTV frequency agile receiver that demodulates ATSC (8VSB) and MPEG-2 HDTV frequencies and supplies crystal clear digital or analog video in various formats.
The TLV400S Professional HDTV new generation frequency agile receiver demodulates satellite DVB-T/DVB-T2/DVB-S/S2 or 8VSB and/or H.264/MPEG-2 HDTV frequencies and supplies crystal clear digital or analog video. Also supports IP transmit and receive over UDP/RTP.
DRD 694 consists of two independent DVB-S/DVB-S2 receiver/demodulators with ASI and Gig Ethernet interfaces, a processor to control both receivers and redundant power supply.
The BE-IRD-5502 is a versatile broadcast-class H.264/AVC (MPEG-4) and MPEG-2 HD/SD integrated receiver and decoder for broadcasters, cable operators, and telecoms. Can also support DVB RF input DVB-S, -S2, -T, -T2, -C.
Light-weight, easy-to-use RF adapter for tuning to any UHF/VHF or cable channel in the 44 to 885MHz range.
Support for all QAM variants. Capture TS signals directly to file on a laptop PC via USB-2 for easy field recording
Accepts up to 4 MPEG-2 or DVB transport streams to be combined on a single ASI output.
Output is single or multiple program transport stream of up to 100 mbps in DVB-ASI format suitable for modulation or other MPEG transport and processing equipment
The MXA108 aggregates and multiplexes SPTS’s and MTPS’s from up to 12 ASI sources into two independent IP or ASI output streams.
ASI multiplexer with ASI andIP outputs. Supports 5 (or 10) ASI inputs, each supporting wire speed; a three-way mirrored ASI output, GIGE, and optional SMPTE-310. The DTA-3050 is IPTV and BBTV ready today, it supports multicast and unicast configurations including SPTS/UDP, MPTS/UPD, MPEG and DVB tables.
The D2iMux is a cost effective HD/SD MPEG digital video IP stream multiplexer that transforms services from ASI and Gigabit Ethernet into a tailored transport stream ready for distribution over ASI, IP and SMPTE-310.
2 ASI inputs, IP (up to 8 IP streams) input, 2 ASI outputs, IP output.
The D2Mux is a cost effective HD/SD MPEG digital video multiplexer that transforms services from ASI and Gigabit Ethernet into a tailored transport stream ready for distribution over ASI, IP and SMPTE-310
Create and maintain the Program and System Information Protocol (PSIP) guide data for ATSC digital transport streams. The program guide information can be imported from a standard spreadsheet and is used by D2Guide to create the EIT tables necessary to meet FCC PSIP requirements.
Rainier multiviewers are available in a variety of models, allowing users to combine multiple DVI-I and HD/SD-SDI/Composite Video signals on a single display in resolutions up to 1920 x 1200.
VCC-8000 multiviewers allow users to effortlessly combine up to four (4) DVI-I/VGA and four (4) HD/SD-SDI/Composite Video signals on a single display. Usable in standalone or cascaded systems with up to eight (8) VCC-8000 and/or MCC-8004 modules, VCC-8000 modules can provide facility-wide computer and video monitoring capabilities.
MCC-8004 modules are each equipped with connectors for four (4) discrete video inputs. To provide audio support, the modules allow audio inputs in either four (4) pairs of analog stereo or balanced/unbalanced AES/EBU. Digital embedded audio can be extracted from HD/SD-SDI video streams.
Complete DVB-T/T2 Analysis, from RF down to the Video. Allows to monitor DVB-T and DVB-T2 parameters (RF, T2 frame structure, PLP parameters), whatever the DVB-T (MFN/SFN…) or DVB-T2 transmission mode (Single PLP, Multi PLP, SFN/MISO. ..).
Light-weight, easy-to-use RF adapter for tuning to any UHF/VHF or cable channel in the 44 to 885MHz range.
Support for all QAM variants. Capture TS signals directly to file on a laptop PC via USB-2 for easy field recording
Low cost and high performance 9 kHz to 6.2 GHz Frequency Range spectrum analyzer. With many advanced features and a 6.4″ Color TFT LCD Display.
Low cost and high performance 9 kHz to 3.0 GHz Frequency Range spectrum analyzer. With many advanced features and a 6.4″ Color TFT LCD Display.
The digital streaming DTV/Mobile TV modulator with USB connection has the ability to stream an MPEG stream from hard disk and output an industry-standard 50-870MHz (VHF + UHF) RF signal.
IP-to-ASI and ASI-to-IP. 2 GigE ports. UDP, RTP, FEC. Up to 12 bi-directional ASI ports.
Gigabit Ethernet 10/100/1000 port.Three bi-directional DVB-ASI ports.Transcoding between ASI and TSoIP.
Transmission and reception of Transport Streams over IP networks. IP jitter analysis.
Standalone module can either be used as compact autonomous TSoIP to ASI gateway, or as remote I/O device for PC-based applications
Standalone module can either be used as compact autonomous ASI to TSoIP gateway, or as remote I/O device for PC-based applications
ASI-Pro simplifies and cost reduces links to remote sites by allowing the video to stream reliably over economical IP networks. One side of the palm-sized ASI-Pro plugs into coax from an MPEG-to-ASI encoder, the other to an Ethernet cable.
GigaCaster high density video gateways can handle up to 8x MPEG-2 Transport Streams (MPEG-2 TS) in ASI to IP direction or in IP to ASI direction.
